| G Codes |
| *G00 positioning (rapid traverse) |
| *G01 linear interpolation (feed) |
| *G02 circular interpolation CW |
| *G03 circular interpolation CCW |
| *G04 dwell |
| G07 imaginary axis designation |
| G09 exact stop check |
| G10 offset value setting |
| *G12 Hole Mill Clockwise |
| *G13 Hole Mill Counter Clockwise |
| *G17 XY plane selection |
| *G18 ZX plane selection |
| *G19 YZ plane selection |
| *G20 input in inch |
| *G21 input in mm |
| G22 stored stroke limit ON |
| G23 stored stroke limit OFF |
| G27 reference point return check |
| *G28 return to reference point |
| G29 return from reference point |
| G30 return to 2nd 3rd & 4th ref. point |
| *G31 skip cutting |
| G33 thread cutting |
| *G40 cutter compensation cancel |
| *G41 cutter compensation left |
| *G42 cutter compensation right |
| *G43 tool length compens'n + direction |
| *G44 tool length compens'n - direction |
| *G49 tool length compensation cancel |
| G45 tool offset increase |
| G46 tool offset decrease |
| G47 tool offset double increase |
| G48 tool offset double decrease |
| G50 scaling OFF |
| G51 scaling ON |
| G52 local coordinate system setting |
| *G54 work conditions system 1 select |
| *G55 work coordinate system 2 select |
| *G56 work coordinate system 3 select |
| *G57 work coordinate system 4 select |
| *G58 work coordinate system 5 select |
| *G59 work coordinate system 6 select |
| G60 single direction positioning |
| G61 exact stop check mode |
| G64 cutting mode |
| G65 custom macro simple call |
| G66 custom macro modal call |
| G67 custom macro modal call cancel |
| G68 coordinate system rotation ON |
| G69 coordinate system rotation OFF |
| *G73 peck drilling cycle |
| *G74 counter tapping cycle |
| G76 fine boring |
| *G80 canned cycle cancel |
| *G81 drilling cycle, spot boring |
*G82 drilling cycle, counter boring (dwell)
|
| *G83 peck drilling cycle |
| *G84 tapping cycle |
| *G85 boring cycle |
| G86 boring cycle |
| G87 back boring cycle |
| G88 boring cycle |
*G89 boring cycle (dwell)
|
| *G90 absolute programming |
| *G91 incremental programming |
| *G92 programming of absolute zero pt |
| G94 per minute feed |
| G95 per revolution feed |
| G96 constant surface speed control |
| G97 constant surface speed control cancel |
| *G98 return to initial point in canned style |
| *G99 return to R point in canned cycle |
Professional features, Hobbyist price
